Control Three
  • Home
  • About Us
    • Contact Us
  • Products
    • Disinfectant/Germicide
    • Laboratory/Germicide
    • Home Care Kit
  • Applications
    • CPAP Masks
    • Medical Tool | Equipment Disinfection
    • Hard Surfaces
    • Home and Office Disinfection
    • Laundry Applications
    • Storage and Residual Life:
  • Purchase
    • Health Care Providers: USA National Sources
    • Purchase: Direct To Patient Sales
    • Purchase: International Sources
  • Downloads
    • MSDS
    • Labels
  • Feedback
  • Samples
  • Information Request

Medical tool and equipment disinfection:

Picture
Medical tool and equipment disinfection:
  1. Prepare use solution of 1 ounce (2 Tablespoons) of the Control III Disinfectant/Germicide concentrate to one gallon of water.
  2. Immerse tools for 10 minutes (Diluted solution can be handled without gloves).  Prior to disinfection gross debris can be removed with a mild detergent if necessary.
  3. Remove tools or equipment from solution, and rinse thoroughly.
  4. Pat dry or allow to air dry.
Note: Control III Laboratory/Germicide has a rust inhibitor that allows for the safe use of the product with stainless steel instruments.
× By using this site you consent to the use of cookies. Cookies can be managed in your browser or device settings.
Copyright 2020 Maril Products, Inc.
Website by Command Graphic Design