Hard Surfaces:

Hard Surfaces

1. Prepare use solution of 1 ounce, or 2 Tablespoons, of the Control III Disinfectant concentrate to one gallon of water.
2. Use a sprayer bottle or sterile sponge to apply product to the desired disinfecting surface (Diluted solution can be handled without gloves).
3. Once sprayed, let solution rest for 10 minutes on disinfected areas.
4. Pat dry or allow to air dry.
   

Note: Control III Laboratory/Germicide has a rust inhibitor that allows for the safe use of the product with stainless steel instruments